Using Recycled Tetrapak and Doped Titanyl/Vanadyl Phthalocyanine to Make Solid-State Devices

In this work we studied the semiconductor behavior of titanyl phthalocyanine (TiOPc) and vanadyl phthalocyanine (VOPc), doped with anthraflavic acid and deposited on Tetrapak/graphite as flexible electrodes. The molecular structure was approached using the density functional theory and astonishingly, it was found that the structure and electronic behavior can change depending on the metal in the phthalocyanine. Experimentally, the Root Mean Square was found to be 124 and 151 nm for the VOPc-Anthraflavine and TiOPc-Anthraflavine films, respectively, and the maximum stress was 8.58 MPa for the film with VOPc. The TiOPc-Anthraflavine film presents the smallest fundamental gap of 1.81 eV and 1.98 eV for indirect and direct transitions, respectively. Finally, the solid-state devices were fabricated, and the electrical properties were examined. The tests showed that the current–voltage curves of the devices on Tetrapak and VOPc-Anthraflavine on a rigid substrate exhibit the same current saturation behavior at 10 mA, which is achieved for different voltage values. Since the current–voltage curves of the TiOPc-Anthraflavine on a rigid substrate presents a defined diode model behavior, it was approximated by nonlinear least squares, and it has been determined that the threshold voltage of the sample for the different lighting conditions is between 0.6 and 0.8 volts.